Diagbox 9.85 Native Installation Tutorial on Windows 7, 8, 10, 11
This guide will take you step by step through how to install the software Diagbox 9.85 directly on your Windows operating system, without a virtual machine.
Prerequisites before starting:
- Make sure you have a computer with Windows 7, 8, 10 or 11 installed.
- Download the archive "Diagbox_9.85_noVM.zip" on your computer.
- Have the provided installation password.
- Temporarily disable your antivirus to avoid any blocking during installation.
- Perform all steps as administrator.
Step 1: Unzip the archive
- Locate the file "Diagbox_9.85_noVM.zip" downloaded.
- Right click on the file and select "Extract here" or use software like WinRAR ou 7-Zip to unzip the archive.
- A folder containing the installation file "DiagBox9.85.exe" will be created.
Step 2: Installing Diagbox 9.85 software
- Open the extracted folder and locate the file "DiagBox9.85.exe".
- Right click on this file and select "Run as administrator".
- When the installation begins, enter the installation password provided.
- Follow the on-screen instructions until the process is complete.
⚠️ Please note: Installation may take between 15 and 20 minutes. Do not close the program until the installation is complete.
Step 3: Installing the Drivers
Once the installation of Diagbox 9.85 software is complete:
- On your desk, you will find a file named "Ë«»÷Çý¶¯".
- Double click on this file to start the installation of the drivers required.
- Follow the instructions and validate to complete the driver installation.
Step 4: Probe Update (optional)
If you want to update your probe:
- Download and install PSA Interface Checker (tool to check and update your interface).
- Launch the program, connect your probe to the computer and follow the instructions to perform the update.
Step 5: Final Check
- Connect your interface to your vehicle and your computer.
- Launch Diagbox 9.85 to verify that the software is working properly.
Additional tips:
- Make sure your interface is compatible with Diagbox 9.85.
- Remember to reactivate your antivirus after installation.
- If you have any problem with the drivers, re-run the file "Ë«»÷Çý¶¯" in administrator mode.
Conclusion
Your software Diagbox 9.85 is now installed natively on your Windows system. You are ready to perform your PSA vehicle diagnostics and reprogramming with ease.
