✅ How to Install MPPS V21 on Windows – Complete Step-by-Step Guide
You have just acquired MPPS V21, one of the most reliable ECU reprogramming tools? Follow this detailed installation tutorial for Windows to properly configure your interface without errors.
⚠️ Important : Never connect the MPPS cable to your computer until the installation is complete.
🔧 Steps to Install MPPS V21 on Windows
📁 1. Extract the installation files
-
Download and unzip the ZIP archive of MPPS V21.
-
Place the folder at the root of your hard drive:
👉 Example:C:\MPPS
💾 2. Install USB drivers
-
Access the folder
Device Driver. -
Select and install the driver appropriate for your operating system:
-
✅ windows 32 bit → install
driver_32bit -
✅ windows 64 bit → install
driver_64bit
-
These drivers are essential for your PC to correctly recognize the MPPS interface.
🔌 3. Connect the MPPS interface
-
Once the drivers are installed, connect the MPPS cable to a USB port from your computer.
▶️ 4. Launch the MPPS software
-
Open the main folder and double-click on
MPPS.exe. -
The software should start normally. If an error message appears, check the previous steps.
🖥️ 5. Use advanced features
-
Personalized shortcuts are available on the desktop to quickly access functions:
-
🔧 tricore
-
⚙️ multiBoot
-
Use them as needed for your reprogramming session.
🚫 Things to know before use
-
MPPS V21 software is exclusively for the provided interface.
🧠 Good to know
-
Compatible with Windows 7, 8, 10, and 11 (64-bit recommended)
-
No internet connection required for installation
