Galletto 4 - V54

119,95€ 139,95€ -15% DISCOUNT

Galletto 4 - V54

119,95€ 139,95€ -15% DISCOUNT
LIMITED TIME OFFER 00
days
00
hours
00
minutes
00
seconds

The price of this item will be 139,95€ at the end of this countdown.

Description Shipping Consumer reviews

FGtech Galletto 4 Master V54 - Full Chip 0475: Engine ECU programmer via OBD or on table.


The GALLETTO is a simple tool that allows you to read and write original or modified files in the vehicle's ECU through its OBD 2 socket in a few minutes. It communicates with a wide range of ECUs, even the latest generation, and allows you to read and write directly to the ECU microprocessor, flash memory and EEPROM.

With an intuitive interface, it really aims to simplify handling for professionals and amateurs alike.

You will be able to master the entire reprogramming in a few minutes.

When the OBD2 socket cannot be used for reading and writing, the GALLETTO is equipped with the cables for a table connection (BDM JTAG).

First you read the files inside the ECU using GALLETTO, then you have your file modified by a professional and finally you write them back to the ECU.


Programming Flexfuel BioEthanol with the GALLETTO:

The GALLETTO allows you to transform your petrol vehicle equipped with multipoint injection into Flex fuel

It will thus be able to run on SP95 / SP98 or E85 Super-Ethanol, without adding any additional box.

The transformation is quick, simple, economical and completely invisible to technical control or the garage. You'll get your next fill-up at half price!


Power and torque programming:

You are probably interested in programming a Stage 1, a Stage 2 or handling EGR, FAP, SCR, Adblue, Limiters, etc. valve options.

Gain in performance, in pleasure and lower your consumption for a derisory cost

Reprogram your engine ECU but also that of your friends, or start a new activity, there is no limit of use


GALLETTO Master Version:

Full recovery mode

Default DTC error analysis and removal tool

Monitor battery voltage in real time

Etc ...


Main advantage of the GALLETTO:

- GALLETTO is able to write via OBD and via Tricore BDM

- GALLETTO is ultra-compact

- Its software launches without having to connect to a vehicle


GALLETTO compatibility:

- With many cars, light commercial vehicles, trucks, tractors, boats, etc...

- Communication protocols with ECUs up to 2012.


GALLETTO protocols:

NEW JTAG - BDM - MOTOROLA - FREESCALE – INFINEON

Freescale MPC 5553/5554/5565/5566 NEXSUS PORT New IAW MJD 8F2

Delphi DCM3.5xx DCM3.7xx TRW

Motorola Freescale MPC 555 / 556 / 561 / 562 / 563 / 564 / 565

Motorola MC 68332 - MC YQQCU - MC 68377 Trionic 5 / 7 / 8 GM-OPEL-SAAB

Motorola MC68376-01 Lamborghini-Lotus

Motorola MC 68336 MEMS D5 ROVER

Motorola ZC 439615 - ZC 439507 IAW FIAT - VAG

VPM GM - Hummer-Corvette-Munstang-Blazer-Cadilac

Tx-Rx-Subaru-Mitsubishi-Hitachi-Denso ECU

All EDC17 MED17 in Boot Mode.


Automatic Calculation of Checksum:

All old protocols are included: Bosch MExx / EDCxx / Marelli / Siemens / Delphi / Lucas / Denso

Boot Mode C167x/ST10

Boot Mode Infineon with password Bosch/Siemens

Motorola MC68332 - MCYQQCU - MC68377 - MC68376 - MC6833 - ZC439615 - ZC439507

Motorola Freescale MPC 555 / 556 / 561 / 562 / 563 / 564 / 565

Freescale MPC 5553 / 5554 / 5565 / 5566

BDM


Industrial vehicles:

K-line, KWP, CAN

Can Bus V2.0 50Kb > 1000Kb

J1850 VPW PWM GM - FORD

Rx Tx RS232

RS 485

K-line 250, 500, 1000 ohm,

Automatic Can Bus 0, 60,120 ohms


Consult the manual, the compatibility list of vehicles, motorcycles, trucks, buses... as well as the various protocols supported by the GALLETTO in the "attached documents" section.

 

Contents of the GALLETTO package:

1x FGTech GALLETTO 4 interface

1x Cable for boot ECU

1x Adapter for BDM

3x BDM Adapters

6x BDM Connectors

1x OBD2 Cable

1x USB cable

1x EOBD2 Software CD


GALLETTO works only under Windows XP and Windows 7 in 32 bits


NOTICE! Read this imperatively before buying!

This software is intended for professional use only. We do not provide any educational content or technical support to avoid incorrect use of files.

We assume no responsibility for misuse of software or files, as well as for any damage caused to your ECU due to use of incorrect files or handling errors.

If you are unsure whether you can use this software/tool ​​correctly, we recommend that you do not make this purchase.

Shipping for physical tools:

Where do our tools ship from?

We have established partnerships with European suppliers, particularly in Germany and Spain, who are responsible for assembling and quality checking the tools before sending them. We work with renowned providers such as Colissimo, DHL, GLS, etc., to ensure reliable delivery.

What are the shipping times?

Typically, orders are shipped within 72 hours. Average delivery times vary between 2 and 10 working days, depending on the country of destination and the type of tool ordered.

 

Shipping for digital products:

How are our digital products sent?

Shipments are made instantly by email, usually within 24 hours of purchase (except in cases of computer maintenance). You will receive a text file containing the necessary download links and instructions.

If you don't receive anything, remember to check your spam folder (SPAM). If the problem persists, do not hesitate to contact us via the dedicated form.

For any other questions, consult our FAQ section.

30-day money-back guarantee*

Free delivery in EU

Maximum payment security

Easy returns in the EU

Apple Pay Teacher Mastercard PayPal Visa