DIAGBOX is a complete diagnostic tool compatible for Citroën, Peugeot and DS vehicles.
The diagnostic software are:
- PP2000 for Peugeots from 1995 to 2006.
- Lexi 3 for Citroëns from 1995 to 2006.
- Diagbox v7.83 for all vehicles of the PSA group up to 2016, works only under Windows 7 in 32 bits (Integrates PP2000 et Lexi 3). (not easy to install)
- Diagbox v9.125 for all vehicles of the PSA group up to 2022, works under Windows 7, 8, 10 in 64 bits (Integrated PP2000 et Lexi 3). (pre-installed on VMWARE partition)
- AER and the diagnostic box COMPACT of high-end manufactory, it is more stable in the functions of diagnostic, reading parameters, In the ECU setup et ECU programming. With 12V wiring.
Diagnosis is carried out via the OBD2 connector (which is near the steering wheel) or via the manufacturer-specific connector (only for older cars, pre-2001).
Unlike other tools universal diagnosis which only read fault codes or generic functions, this software performs almost ALL the functions of the original diagnostic tool of the dealer.
The only missing functions are online operations requiring access to the brand's servers.
Please note that the default Diagbox CD version is V7.83, it is the most stable and easy to use function. If you order version V9.91-9.125, it will be automatically sent by email after purchase.
This version of DIAGBOX will allow you to perform the following operations:
- Reading and erasing error codes
- Reading of settings (recording and graphic visualization)
- Testing actuators
- Configuring calculators
- Coding (injectors, electronic valves, rim size, equipment level, etc.)
- calibration and self-study (calibration of the oil change interval, replacement of the EGR valve, DPF, etc.)
- Reset of maintenance indicators
- And many more functions
You can communicate with the following calculators:
- Diesel/gasoline injection
- Automatic gearbox
- Intelligent Service Box (BSI)
- ABS / ESP
- Air conditioner
- Comfort systems
- Power steering
- Driven suspension
- And many more functions
- Engine ECU diagnostics
- Diagnostics of the injection computer (diesel, gasoline, flex-fuel, gas, etc.)
- Programming of injectors
- EGR Valve Calibration
- Diagnosis of ABS and ESP computers
- Diagnosis and maintenance of the parking brake
- Bleeding brake system
- Diagnosis and regeneration of the particulate filter
- Adblue module control
- Electronic control of pollutant emissions
- Lambda probe check
- Reset/initialization of the maintenance/emptying counter
- Bleeding of different fluids (brakes, cooling)
- Read/erase motor faults
- Maintenance of the particle filter
Air conditioner :
- Complete diagnosis of the electronic and mechanical system
- Reading the parameters of the cooling circuit
- Order testing
Ground connection :
- Electronic tire size configuration
- Electronic tire configuration (winter/summer)
- Tire pressure adjustment
- Configuration of electronic valves
- Calibration of the steering wheel angle sensor (initialization of the steering angle)
- Activation of the safety airbags (locking/unlocking)
- Configuration of a new airbag computer
- Diagnosis of airbag computers
- Rain Sensor Setup
- Configuration of automatic lighting of lights
- Activation of xenon headlights
- Activation of the reversing radar
- double dice
- Radio activation
- CD changer setup
- Alarm activation/configuration
- Hitch configuration
- Bike hitch configuration
Language supported by Diagbox:
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungarian, Greek, Czech.
Installation tips for DIAGBOX 7.XX:
- PP2000 and LEXIA 3 should only be installed on Win XP 32 bit,
- DIAGBOX v7.83 should only be installed on Win7 32 bit.
- Do not install LEXIA 3 and PP2000 software on the same computer as DIAGBOX. The DIAGBOX software already includes the PP2000 and LEXIA 3 software.
- When you install any of the software, turn off your anti-virus and firewall, otherwise the files may be corrupted or deleted.
Watch out for updates:
- Please CUT file "C:AWRoot\bin\fi\APPDIAG.SYS" before update, then click "update package".
- After full update, please PASTE the cut file into the previous folder, which can avoid the activation problem.
- Password for the DIAGBOX update:
- 02-7.76: scary01
- 76-7.82: Maitresox01
- 82-7.83: Very Easy!
Contents of the DIAGBOX package:
1x Diagbox Interface (Lexia 3 - PP2000) [ALL VERSIONS]
2x Long and short USB cable [ALL VERSIONS]
1x 12V clamp cable [NORMAL, FULL CHIP only]
1x DVD containing DIAGBOX v7.83 (Lexia 3 - PP2000 included) [ALL VERSIONS]
Diagbox v7.83 for all vehicles of the PSA group up to 2016, works only under Windows 7 in 32 bits (Integrates PP2000 et Lexi 3). (not easy to install)
Diagbox v9.125 for all vehicles of the PSA group up to 2022, works under Windows 7, 8, 10 in 64 bits (Integrated PP2000 et Lexi 3). (pre-installed on VMWARE partition)