The CAN Clip V192 software is only compatible with the following old diagnostic tool for RENAULT and DACIA vehicles:
>> Click here to access the Can Clip V192 diagnostic tool sheet
The diagnostic software is:
- CAN-Clip V192 is the latest software that does not require token authentication for vehicle diagnostics after 2017. For all Renault and Dacia vehicles from 1999 until September 2019, only works under Windows 7 in 32 bit.
Unlike others universal diagnostic tools which are limited to the reading error codes or to generic functions, this software accomplishes practically ALL the functionalities of theoriginal diagnostic tool from the dealer.
The only functions not available are those that require online operations, requiring direct access to the brand's servers.
CThis edition of CAN Clip gives you the ability to do the following:
- Reading and clearing error codes
- Reading parameters (recording and graphic visualization)
- Actuator testing
- Configuration of calculators
- Coding (injectors, electronic valves, rim size, equipment level, etc.)
- Calibration and self-learning (calibration of the drain interval, replacement of the EGR valve, DPF, etc.)
- Resetting maintenance indicators
- And much more...
You can establish communication with the following computers:
- Diesel/gasoline injection
- Automatic gearbox
- UCH
- ABS / ESP
- Airbag
- Air-conditioning
- Dashboard
- Comfort systems
- Power steering
- Driven suspension
- And many others...
Engine:
- Engine ECU diagnostics
- Diagnostics of the injection computer (diesel, gasoline, flex-fuel, gas, etc.)
- Programming of injectors
- EGR Valve Calibration
Braking:
- Diagnosis of ABS and ESP computers
- Diagnosis and maintenance of the parking brake
- Bleeding brake system
Pollution:
- Diagnosis and regeneration of the particulate filter
- Adblue module control
- Electronic control of pollutant emissions
- Lambda probe check
Maintenance :
- Reset/initialization of the maintenance/emptying counter
- Bleeding of different fluids (brakes, cooling)
- Read/erase motor faults
- Maintenance of the particle filter
Air conditioner :
- Complete diagnosis of the electronic and mechanical system
- Reading the parameters of the cooling circuit
- Order testing
Ground connection :
- Electronic tire size configuration
- Electronic tire configuration (winter/summer)
- Tire pressure adjustment
- Configuration of electronic valves
- Steering wheel angle sensor calibration (steering angle initialization)
Security:
- Activation of safety airbags (locking/unlocking)
- Configuration of a new airbag computer
- Diagnosis of airbag computers
- Rain Sensor Setup
- Configuration of automatic lighting of lights
- Activation of xenon headlights
- Activation of the reversing radar
Equipment:
- double dice
- Radio activation
- CD changer setup
- Alarm activation/configuration
- Hitch configuration
- Bike hitch configuration
Language supported by CAN Clip:
Austrian, Belgian, English, German, Danish, Spanish, Finnish, French, Italian, Norwegian, Dutch, Portuguese, Romanian, Swedish, Swiss, Italian, Russian, Polish, Czech, Hungarian, Turkish, etc.
Your PC must be of the same language. For example: you want the Polish language, your PC must be in Polish.
Installation tips:
- When installing any of the software, please disable your antivirus and firewall. This will avoid any risk of file corruption or deletion.
- This software is only compatible with Windows 7 in 32 bits. To use it on a 64-bit system (Windows 7, 8, 10), you have the option of installing a Virtual Machine.
- When connecting the device to the car, make sure the vehicle voltage is above 13V to ensure optimal operation.
- Do not install two different versions of the software on the same computer, as this may corrupt the probe. Before installing a new version, make sure you uninstall the previous version correctly. No reactivation of the software is necessary if a previous installation and activation has already been performed.
Installation procedure :
PREREQUISITES
- Operating system: Windows 7 32-bit only.
INSTALLATION
- Before starting the installation, run the file 01. Renault CLIP.reg.
- Proceed with the installation of the CLIP software normally, accepting the installation of the drivers.
- Restart the computer if necessary.
ACTIVATION
- Do not run CLIP after installation!
- Go to the directory
C:\CLIP_X91\Lib\Application\
. - Save the file RSWin.exe original by moving it to your desktop.
- Replace RSWin.exe in
C:\CLIP_X91\Lib\Application\
by that of the file 02 to activate the software. - Run RSWin.exe in
C:\CLIP_X91\Lib\Application\
.- Select “Register me now”.
- In the next window, choose "NO".
- Generate your registration key using Renault CLIP TOOL ou Renault Can Clip Registration available in file KEYGEN.
- Once the software is activated, put it back RSWin.exe original (the one saved on your desktop) in its place in
C:\CLIP_X91\Lib\Application\
. - Launch CLIP software from your desktop and enjoy it.
PROBE PATCH
- If your Can Clip tool is not recognized:
- Replace the files probesConfiguration.xml et probesConfiguration_logs.xml In the directory
C:\CLIP\Config
by those in the file 03.
- Replace the files probesConfiguration.xml et probesConfiguration_logs.xml In the directory
- To access vehicles before 2005:
- Copy the file IsoDrv.dll folder 03 toward
C:\Program Files\Common Files\SAGEM SA
.
- Copy the file IsoDrv.dll folder 03 toward
Follow these steps to install and activate your Renault Can CLIP software on a Windows 7 32-bit system.
Purchase contents:
1 x Access to CAN Clip version V192 for download
Shipping for physical tools:
Where do our tools ship from?
We have established partnerships with European suppliers, particularly in Germany and Spain, who are responsible for assembling and quality checking the tools before sending them. We work with renowned providers such as Colissimo, DHL, GLS, etc., to ensure reliable delivery.
What are the shipping times?
Typically, orders are shipped within 72 hours. Average delivery times vary between 2 and 10 working days, depending on the country of destination and the type of tool ordered.
Track your order
You will receive a shipping confirmation email with a tracking link as soon as your order leaves our warehouse. You will be able to follow the status of your order in real time and know the approximate delivery date.
Questions and assistance
For any questions regarding the shipping of your physical tools, do not hesitate to consult our FAQ or contact us via our dedicated form. Our team is always available to help you.
Shipping for digital products:
What do we mean by digital products?
By digital products, we designate all products delivered in dematerialized form, such as :
- Software (downloadable or accessible online)
- Databases
- Documents (e-books, guides, manuel, etc.)
- Archives (compressed files, pictures, etc.)
- Software packages (bringing together several software)
Instant email reception
As soon as you finalize your purchase of digital products, You will receive an email with download links and instructions to access your products. In general, delivery is instant, but may take up to 24 hours in case of computer maintenance. There is no physical shipping.
Check your inbox and SPAM folder
Make sure to check your inbox carefully, including SPAM folder, so you don't miss the email containing your digital products. If you still can't find the email, do not hesitate to contact us via our dedicated form.
FAQ & Support
For any questions regarding the shipping of your digital products, Do not hesitate to consult our FAQ or contact us via our dedicated form. Our team is always available to help you.
For any other questions, consult our FAQ section.
30-day money-back guarantee*
Free delivery in EU
Maximum payment security
Easy returns in the EU