Function to be activated via VCDS - VAG-COM software
Description of the option:
Allows you to set the door unlock confirmation when using the remote control.
[46 – Comfort Module] -> [Adaptation – 10] -> Channel 07
Set the value to 0 (no confirmation)
Set the value to 1 (confirmation with flashing lights)
Set the value to 2 (confirmation with Beep/Horn)
Set the value to 3 (confirmation with turn signals + beep/horn)
If the adaptation channel is not activated.
[46 – Comfort Module] -> [Coding-07] -> [Long Coding Wizard]
Byte 10:
Bit 2: Check “Unlocking Confirmation (Blink) via Remote Control”
Bit 3: Check “Unlocking Confirmation (Horn) via Remote Control” (confirmation with Beep/Horn)
