Description
Shipping
Consumer reviews
Renault Can K-line Immo Tool V4.04 - Programming Tool for Renault
The Renault Can K-line Immo Tool V4.04 is an advanced programming tool specially designed for Renault vehicles. With its extensive support for CAN/K-line EEPROM reading and writing functionalities, this tool offers a complete solution for modifying the internal memory of electronic control units (ECUs) of Renault cars.
Main Features:
- Extended Compatibility: Works with a wide range of Renault ECU systems, including late models.
- Ease of use: No need to open the control unit or solder components - all functions are done through the OBDII connector.
- Immobilizer Code Cleaning Function: Automatically clears the previously saved immobilizer code to allow the use of a new ECU or data cloning.
- Versatile Software: Supports a variety of Renault protocols and ECU models for maximum flexibility.
Software Compatibility:
- EDC15C3 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immobilizer Code (Immo code)
- EDC15C13 - Read/Write EEPROM, Read/Write FLASH, Clear Immobilizer Code (Immo code)
- SIRIUS 31H - Read/Write EEPROM, Read/Write FLASH, Clear Immobilizer Code (Immo code)
- SIRIUS 32[N] (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immobilizer Code (Immo code)
- SIRIUS 34 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immobilizer Code (Immo code)
- SIRIUS 35 - Read/Write EEPROM, Read/Write FLASH, Clear Immobilizer Code (Immo code)
- EMS3132 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immobilizer Code (Immo code)
- EMS3134 (both CAN-BUS and WIRE immo systems) - Read/Write EEPROM, Read/Write FLASH, Clear Immobilizer Code (Immo code)
- SID301 - Read/Write EEPROM, Read/Write FLASH, Clear Immobilizer Code (Immo code), Clear Impact Detection, Read Stored Mileage
- SIM32 - Read/Write EEPROM, Read/Write FLASH from HD64F7055, Clear Immobilizer Code (Immo code)
- SAFIR / SAFIR2 / SFR200 (35/55 pin connector) - Reading the TMS374 EEPROM, Erasing the Immobilizer Code (Immo code) (works without immobilizer code)
- IAW 6R.20 - Read/Write the TMS370 EEPROM
- IAW 6R.30 - Reading the TMS370 EEPROM, Clearing the Immobilizer Code (Immo code)(the vehicle operates without immobilizer code)
- VALEO BII for ESPACE III - Read/Write EEPROM (9)08AZ60, Read/Write Mileage, Erase for Replacement, Read Transponder Data, Emergency Start
- VALEO IMMOBILIZER for LAGUNA I Ph2 (1998-2000) - Transponder Data Reading, Configuration, Reset to Virgin State
- VALEO IMMOBILIZER for LAGUNA I Ph1 / SAFRANE Ph1 (1995-1996) - PIN CODE Reading, Reset to Blank State
- CLUSTER INSTRUMENT for ESPACE III (1998-2002) - Resetting the Counter, Clearing the RF Programming remotely via the instrument cluster connector
- SIEMENS IMMOBILIZER for ESPACE III Ph1 (1996-1998) - Read/Write EEPROM 68HC05B16, read transponder data
- UCH SIEMENS for MEGANE/SCENIC I Ph2 ('99-'02) - Read/Write 705B32 EEPROM, Read/Write Configuration, Key Learn, Reset to Blank State
- UCBIC SIEMENS for MEGANE/SCENIC I Ph1 ('96-'98) - Read/Write EEPROM 68HC05B16, Read/Write Configuration, Reset to Blank State
- LAGUNA II, ESPACE IV, VELSATIS Ph1/Ph2 - Programming the start card, Changing the VIN. Resetting UCH to Blank State, Learning UCH
- MEGANE II, SCENIC II Ph1/Ph2 - MAP/UCH/ECM/ESCL Learning, VIN Change, UCH Reset to Blank State
- CLUSTER INSTRUMENT for SCENIC II ('04-'08) - CAN-BUS activation for repair or mileage check, Change language and units, Change VIN, KM, Read/Write EEPROM
- CLUSTER INSTRUMENT for MEGANE II ('03-'08) - CAN-BUS activation for repair or mileage check, Change language and units, Change VIN, KM, Read/Write EEPROM
- CLIO II Ph1 - Key Learning, Configuration, BMT Reset to Blank State
- CLIO II Ph2-5, KANGOO, TRAFIC, MASTER, VIVARO, MOVANO (-'07) - Read/Write 93C66 EEPROM, Key Learning, VIN Change, UCH Reset to Blank State, Learning about UCH
- KANGOO I, TRAFFIC, MASTER, VIVARO, MOVANO ('07-) - Key Learning, VIN Change, Resetting UCH to Blank State, Learning Blank UCH
- KANGOO II (2007-2012) - Key Programming, VIN Change, BCM Reset to Blank State, Blank BCM Learning
- MODUS / CLIO III ELECTRIC STEERING ASSISTANCE (TRW DAE/PAS) - Clear Immobilizer Code (Immo code), Change VIN by OBDII, Clear DF002 from dump 24C16, CRC repair (IMPROVED!)
- MEGANE/SCENIC III ELECTRIC STEERING ASSISTANCE (NSK DAE/PAS) - Clearing the Immobilizer Code (Immo code), Changing the VIN by OBDII
- TWINGO III ELECTRIC STEERING ASSISTANCE (JTEKT DAE/PAS) - Clearing the Immobilizer Code (Immo code), Changing the VIN by OBDII
- CLIO IV ELECTRIC STEERING ASSISTANCE (JTEKT DAE/PAS) - Clearing the Immobilizer Code (Immo code), Changing the VIN by OBDII
- LAGUNA III (2007-2015) - Boot Board Programming, VIN Change, BCM Reset to Virgin State
- LAGUNA III / LATITUDE (2007-2015) - Learning BCM / ECM / ESCL in protected mode
- LATITUDE (2010+) - Boot Board Programming, VIN Change, BCM Reset to Blank State
- CLIO III/MODUS - Key Programming, VIN Change, Protected Mode ECM Learning, BCM Learning, BCM Reset to Blank State
- CLIO III - Learn Card/UCH/ECM/ESCL, Change VIN, Reset UCH to Blank State
- CLIO IV (2012+) - Programming the card, Changing the VIN, Resetting the HFM to Virgin State, Learning the ECM/ESCL/HFM in protected mode
- MASTER III (2010-2014) - Key Programming, VIN Change, BCM Reset to Blank State, Blank BCM Learning
- TRAFFIC II Ph3 (2010-2014) - Key Programming, VIN Change, BCM Reset to Blank State, Learn BCM Blank
- WIND (2010-2013) - Key Programming, VIN Change, ECM Learning
- TWINGO II (2007-2013) - Key Programming, VIN Change, ECM Learning
- TWINGO (2001-2006), LOGAN (2004-2008), SANDERO I, THALIA, SYMBOL - Key Programming, VIN Change
- LOGAN, SANDERO, THALIA, SYMBOL (2008-2012), Duster (2010-2012) - Key programming, VIN change
- LOGAN, SANDERO, DOKKER, SYMBOL, DUSTER (2012+) - Learn Key/ECM/BCM, Reset to Blank State, Read DataFlash, Change VIN
- MEGANE III / SCENIC III (2009-2015) - Map Programming, VIN Change, BCM Reset to Blank State
- MEGANE III / SCENIC III (2009-2015) - Classic Key Programming, VIN Change, BCM Reset to Blank State
- MEGANE III / SCENIC III / FLUENCE (2009-2015) - Learning BCM / ECM / ESCL in protected mode
- KOLEOS (2008+) - Programming Boot Board, Changing VIN, Resetting BCM to Blank State, Learning ECM/BCM/ESCL
- EDC17 / MED17 EEPROM TRICORE CRC - Resetting EEPROM dump to Virgin State, repairing block CRCs
- EDC16 EEPROM DUMP CRC - Resetting EEPROM dump to Virgin state, repairing block CRCs
- DELPHI DCM 3.4 EEPROM DUMP CRC - Reset EEPROM dump to Virgin State, Change KM, repair block CRCs (NEW!)
- SID305/306/307/308/309 TRICORE DFLASH DUMP CRC - Find/change KM, repair block CRCs
- MEGANE III / SCENIC III / FLUENCE / LATITUDE AIRBAG (CONTINENTAL) - Clear CRASH DATA by OBDII / direct connection
- LAGUNA III AIRBAG (AUTOLIV RC5) - Clear CRASH DATA by OBDII / direct connection
- TWINGO II (X44) / KANGOO II (X61) AIRBAG (CONTINENTAL) - Clear CRASH DATA by OBDII / direct connection
- MASTER III / MOVANO-B / CLIO III Ph2 / MODUS Ph2 AIRBAG (AUTOLIV) - Clear CRASH DATA by OBDII / direct connection
- AIRBAG MODULE WITH SPC560 MCU (CONTINENTAL) - CLEAR CRASH DATA by OBDII / direct connection
- MEGANE II / SCENIC II AIRBAG (AUTOLIV ACU4) - Clear CRASH DATA by OBDII / direct connection
- CLIO II
- CLIO III Ph1 / MODUS Ph1 AIRBAG (BOSCH AB9.X) - Clear CRASH DATA, Clear fault codes by OBDII / direct connection
- AIRBAG SPACE III (SIEMENS) - Clear CRASH DATA, Read/Write internal EEPROM of MCU by OBDII / direct connection
- LOGAN X90 / DUSTER H79 AIRBAG (TEMIC-CONTINENTAL) - Clear CRASH DATA, Read EEPROM by OBDII / direct connection
- KADJAR / TALISMAN AIRBAG (AUTOLIV AC7 with MCU XC2336) - Clear CRASH DATA by OBDII / direct connection
- CLIO IV Ph2 / CAPTUR Ph2 AIRBAG (CONTINENTAL 985100475R with R7F7010133) - Clear CRASH DATA by OBDII / direct connection
Package Content:
- 1x Renault Can K-line Immo Tool V4.04 Diagnostic Head.
- 1x USB Cable.
Important Note: This tool does not completely deactivate the Immobilizer (Immo code). It is designed to erase the previously stored Immobilizer code (Immo code) to allow the use of a new ECU or data cloning.
With the Renault Can K-line Immo Tool V4.04, you can enjoy precise and reliable programming for your Renault vehicles, without the need for additional hardware or advanced technical knowledge. Opt for simplicity and efficiency with this cutting-edge tool.
Shipping for physical tools:
Where do our tools ship from?
We have established partnerships with European suppliers, particularly in Germany and Spain, who are responsible for assembling and quality checking the tools before sending them. We work with renowned providers such as Colissimo, DHL, GLS, etc., to ensure reliable delivery.
What are the shipping times?
Typically, orders are shipped within 72 hours. Average delivery times vary between 2 and 10 working days, depending on the country of destination and the type of tool ordered.
Shipping for digital products:
How are our digital products sent?
Shipments are made instantly by email, usually within 24 hours of purchase (except in cases of computer maintenance). You will receive a text file containing the necessary download links and instructions.
If you don't receive anything, remember to check your spam folder (SPAM). If the problem persists, do not hesitate to contact us via the dedicated form.
For any other questions, consult our FAQ section.
30-day money-back guarantee*
Free delivery in EU
Maximum payment security
Easy returns in the EU
