
DIAGBOX software v9.129 for Peugeot - Citroën - DS - Opel
€14,95
€29,95
DIAGBOX 2022 v9.129 for Peugeot - Citroën - DS - Opel New DIAGBOX software version 9.129 on VMWare (Virtual Machine), released in mid 2022. PRE-INSTALLED VERSION ON VIRTUAL MACHINE (VM Ware), check the compatibility of your computer with virtualization and VM Ware 15 or 16. >> Click here to access the Lexia 3 Diagbox Full Chip 2022 diagnostic tool sheet Advantages of this new software version v9.129: Pre-installed and activated on Virtual Machine No activation to perform None time limitation The most recent version available to date Unlimited diagnosis, coding and programming Diagbox, Lexia and PP2000 software in French Hyper-detailed installation procedure in text and video. Features: You do the same things as your PSA agent or reseller directly at your home. (Reading, writing, measurement of values, remote coding, etc.) Compatibility with ALL Citroën, Peugeot and DS models until 2022! Remote coding and programming until approximately 2015-2016. Software compatibility with almost ALL Windows versions Very simple installation compared to versions 7 and 8. Professional operating stability Ability to print all reports As a bonus, new compatible Opel models. Operation: The software works using the Lexia interface, the PSA diagnostic tool. The Diagbox software is installed on a laptop PC equipped with Windows 7, 8, 10 in 64 bits. The Lexia interface is connected to the PC via the USB socket. You carry out modifications to your vehicle directly on the PC via the user-friendly Diagbox software. Examples of use: Activation of the CD changer function Installation of a reversing radar Installation of a hitch Resetting the revisions Diagnosing faults Erasing error codes Duplication of keys Coding of injectors FAP regeneration Etc. PSA vehicle compatibility: Citroën compatibility Peugeot compatibility DS compatibility Opel compatibility Content of the shipment: Link to download the DIAGBOX 9.129/9.125/9.91 software for Peugeot - Citroën - DS - Opel. Minimum system requirements: PC with at least 6 GB of RAM Intel i3 or higher processor Bios with setting supporting virtualization Operating system Win 7 64-bit, Windows 8 64-bit or Windows 10 64-bit Available storage space min 20 GB MAC incompatible Installation is very simple for a user with a good level of Windows administration. Installation is very simple and very quick compared to Diagbox 7 and 8 versions. This software does not require any activation, it will be operational immediately. You can install it on many types of Windows. Product available in stock, Instant delivery Diagbox 9.129 installation tutorial for Peugeot - Citroën - DS - Opel

MultidiagPro software 2021.11 - 2020.23
From €14,95
€29,95
Multidiag diagnostic software Version 2021.11 and 2020.23 NEW MULTIDIAG PRO 2021.11 is the newest software on the market VERSION PRE INSTALLED ON VIRTUAL MACHINE (VM Ware), check your computer compatibility with virtualization and VM Ware 15 or 16. (2020.23) or CLASSIC INSTALLATION (2021.11 and 2020.23) MULTIDIAG PRO diagnostic tool for Multidiag Pro 2021.11 and 2020.23 software.
Advantages of version 2021.11 and 2020.23: 1. Update history2. Fixed bugs on: Full ISS patch! Now the ISS works for all cars.
The history function fully works.
Full support for old VCIs with serial number 30250 etc...
Now all new cars are visible and available for old units too! Compatible on Win 7, 8, 10 (64 bit). Multidiag Pro is a fast and reliable diagnostic tool serving as a link between vehicle and computer. It works on old and new vehicles alike. With CARS software, you are able to perform diagnostics specific to car and van brands from 1988 onwards. A total of 69 different brands. With TRUCKS software you are able to perform brand specific diagnostics for light and heavy duty vehicles, buses and trailers from 1995 onwards. A total of 77 different brands.
The GENERIC diagnostic program is designed for legislation based diagnostics, specially targeted for emissions related fault codes. GENERIC is included in CARS and TRUCKS packs. Multiplexer function, 2xHS CAN (ISO 11898-2), SW CAN (SAE J2411), K/L (ISO 9141-2), VPW (J1850), PWM (J1850), RS485 (J1708), TTL and (SPI, analog in, 5 volt out).Allows to realize: Read and erase fault codes Read real-time data Basic setting Scanning function Fully compliant with eOBD/OBDII standard.
MULTIDIAG software functions FLIGHT RECORDER With the flight recorder function, you can record parameters in real time while driving a vehicle. While recording you can, at the press of a button, highlight the specific error so that you can investigate the detected error at a later time. The device is equipped with built-in memory, which eliminates the need to bring a computer. The memory card is not included in the package. VOLTAGE CHECK When the device is connected to the vehicle, the unit checks the vehicle battery voltage and automatically adapts to the vehicle voltage level (12 or 24 volt). If the voltage is too high or too low, the unit warns you with a sound and light and you are also alerted by the battery icon in our diagnostic software. CHASSIS NUMBER VIN In our CARS software we have a intelligent function that allows you to read the chassis number of the vehicle you want to diagnose. This ensures that the correct model and year are selected automatically. In addition, the engine code of commonly available vehicles on the market is also selected automatically. ISS Intelligent System Scan (ISS) cycles through all vehicle systems and displays fault codes stored in each system. This saves you time and gives you a quick overview of the actual condition of the entire vehicle. When the ISS is complete, you can then select a specific control system to analyze the results in more detail. ISI Intelligent System Identification (ISI) automatically identifies and selects the type of controller fitted in the vehicle. This helps ensure that the diagnostic session is run correctly with the correct parameters as required. REPORT FUNCTION Under this function tab, you will be able to see the adaptations and adjustments that are possible for a specific vehicle without having the vehicle close to you. With the help texts as a guide, you can plan and be efficient in your work, even in complex situations.OBD FUNCTIONSThe device is equipped with a unique multiplexing technology, which allows it to be used on all types of vehicles, regardless of voltage levels and communication standards. For vehicles that do not use the standard 16-pin connector, we offer a complete set of cables and certified and customized retrofit kits.UNIVERSALFor most OBD functions, like settings and programmings, there are instructions detailed information and help texts to assist you in your diagnostic work. You will find step-by-step information on the prerequisites, preparation and implementation of various functions, which makes even the most complex function simple to perform. HELP FUNCTION For most OBD functions, such as settings and settings, there are detailed instructions and help texts to help you in your diagnostic work. You will find step-by-step information on the prerequisites, preparation and implementation of various functions, which simplifies the execution of the most complex functions.

DIAGBOX v9.129 / v9.91 for Peugeot - Citroen - DS
From €129,95
€159,95
DIAGBOX is a complete diagnostic tool compatible for Citroën, Peugeot and DS vehicles.
The diagnostic software is: PP2000 for Peugeots from 1995 to 2006.
Lexia 3 for Citroëns from 1995 to 2006.
Diagbox v7.83 for all vehicles of the PSA group up to 2016, works only under Windows 7 in 32 bits (Integrates PP2000 and Lexia 3). (installation not very simple provided in CD).
Diagbox v9.125 for all vehicles of the PSA group until 2022, works under Windows 7, 8, 10 in 64 bits (Integrates PP2000 and Lexia 3). (pre-installed on VMWARE partition provided for download).
>> Click here to access only the Diagbox 9.129 software sheet Variants: LITE is the simple diagnostic box of classic quality, which is suitable for simple use of the software for reading/erasing faults.
LITE + 12V clamps, same as the LITE version, with additional 12V wiring.
FULL CHIP is the high-end manufacturer's diagnostic box, it is more stable in diagnostic functions, parameter reading, ECU configuration and ECU programming.
FULL CHIP + 12V clamps, same as the FULL CHIP version, with additional 12V wiring.
Diagnosis is performed via the OBD2 connector (which is near the steering wheel) or via the manufacturer-specific connector (only for older cars, pre-2001).
Unlike other universal diagnostic tools that only read fault codes or generic functions, this software performs almost ALL the functions of the original dealer diagnostic tool.
The only missing functions are online operations requiring access to the brand's servers.
Please note that the default Diagbox CD version is V7.83, it is the most stable and easy to use function. If you order version V9.91-9.125, it will be automatically sent by email after purchase.
This version of DIAGBOX will allow you to carry out the following operations: Reading and erasing of error codes Reading of parameters (recording and graphic display) Testing of actuators Configuration of computers Coding (injectors, electronic valves, rim size, level of equipment , etc.) Calibration and self-learning (calibration of oil change interval, replacement EGR valve, DPF, etc.) Reset of maintenance indicators Etc.
You will be able to communicate with the following computers: Diesel/petrol injection Automatic gearbox Intelligent Service Box (BSI) ABS/ESP Airbag Air conditioning Dashboard Comfort systems Power steering Pilot suspension Etc.
Engine: Diagnostics of the engine computer Diagnostics of the injection computer (diesel, petrol, flex-fuel, gas, etc.) Programming of the injectors Calibration of the EGR valve Braking: Diagnostics of the ABS and ESP computers Diagnostics and maintenance of the brake parking lot Brake system bleeding Pollution: Diagnosis and regeneration of the particle filter Adblue module check Electronic check of pollutant emissions Check of the lambda probe Maintenance: Reset/initialization of the maintenance/oil change counter Bleeding of the various fluids (brakes , cooling) Read/erase engine faults Maintenance of the particle filter Air conditioning: Complete diagnosis of the electronic and mechanical system Reading of the parameters of the cooling circuit Test of the controls Ground connection: Electronic configuration of the size of the tires Electronic configuration of the tires (winter /summer) Tire pressure adjustment Electronic valve configuration Calibration of the steering wheel angle sensor (initialization of the steering angle) Safety: Activation of the safety airbags (locking/unlocking) Configuration of a new airbag computer Diagnosis of the airbag computers Configuration of the sensor Configuration of automatic lighting of lights Activation of xenon headlights Activation of reversing radar Equipment: Double dice Activation of car radio Configuration of CD charger Alarm activation/configuration Towing configuration Bicycle towing configuration Language supported by Diagbox: English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungarian, Greek, Czech.
Installation tips for DIAGBOX 7.XX: PP2000 and LEXIA 3 should only be installed on Win XP 32 bit, DIAGBOX v7.83 should only be installed on Win7 32 bit.
Do not install LEXIA 3 and PP2000 software on the same computer as DIAGBOX. The DIAGBOX software already includes the PP2000 and LEXIA 3 software.
When you install any of the software, turn off your anti-virus and firewall, otherwise the files may be corrupted or deleted.
Attention to updates: Please CUT the file "C:AWRoot\bin\fi\APPDIAG.SYS" before updating, then click "update package".
After full update, please PASTE the cut file into the previous folder, which can avoid the activation problem.
Password for DIAGBOX update: 02-7.76: scary01 76-7.82: Maitresox01 82-7.83: Very Simple!
Contents of the DIAGBOX package: 1x Diagbox interface (Lexia 3 - PP2000) [ALL VERSIONS] 2x Long and short USB cable [ALL VERSIONS] 1x 12V clamp cable [NORMAL, FULL CHIP only] 1x DVD containing DIAGBOX v7.83 (Lexia 3 - PP2000 included) [ALL VERSION] Diagbox v7.83 for all vehicles of the PSA group up to 2016, works only under Windows 7 in 32 bits (Integrates PP2000 and Lexia 3). (installation not very simple provided in CD).
Diagbox v9.129 for all vehicles of the PSA group until mid 2022, works under Windows 7, 8, 10 in 64 bits (Integrates PP2000 and Lexia 3). (pre-installed on VMWARE partition provided for download).

DIALOGYS 4.90 software – End of 2019
€9,95
€29,95
DIALOGYS 4.90 software – End of 2019 for Renault / Dacia – Electronic After-Sales Catalog Description: Dialogys is an after-sales software for Renault allowing all technical documentation to be listed for the entire worldwide after-sales network. Repair manuals, technical bulletins, troubleshooting method, catalog parts, diagnostic manuals and labor times, you will find all the technical documents that allow you to repair a vehicle. Purchase contents: 1x Windows download link for DIALOGYS version 4.90.

CAN Clip V229 for Renault - Dacia
From €189,95
€219,95
CAN Clip is a complete diagnostic tool compatible for RENAULT and DACIA vehicles.
The diagnostic software is: CAN Clip V212 (for old probe) for all Renault and Dacia vehicles until August 2021, works only under Windows in 32 bits.
CAN Clip V229 (for new sensors) for all Renault and Dacia vehicles until June 2023, only works under Windows in 32 bits.
>> Click here to access the Can Clip V229 software sheet only >> Click here to access the Can Clip V212 software sheet only Variants: New VCI: Normal design and new generation. Compatible Version V220 and V229. Not compatible for vehicles before 2005-2006.
CAN Clip NORMAL: the design is of normal quality, suitable for simple use of the module, reading / erasing faults, drain reset, etc. Compatible Version V212. Support for pre-2005-2006 vehicles.
High-end CAN CLIP (golden): AN2131QC circuit with NEC/OMRAN relay, good quality chips and design, better stability in programming or reading parameters. Compatible Version V212. Support for pre-2005-2006 vehicles.
Diagnosis is performed via the OBD2 connector (which is near the steering wheel) or via the manufacturer-specific connector (only for older cars, pre-2001).
Unlike other universal diagnostic tools that only read fault codes or generic functions, this software performs almost ALL the functions of the original dealer diagnostic tool.
The only missing functions are online operations requiring access to the brand's servers.
Please note that the default version of CAN Clip CD is V178, we will send you a download link for the latest version V229 which cannot fit on a single CD.
This version of CAN Clip will allow you to carry out the following operations: Reading and erasing error codes Reading of parameters (recording and graphic visualization) Testing of actuators Configuration of ECUs Coding (injectors, electronic valves, rim size, level of equipment, etc.) Calibration and self-learning (calibration of oil change interval, replacement of EGR valve, DPF, etc.) Reset of maintenance indicators Etc.
You will be able to communicate with the following computers: Diesel/petrol injection Automatic gearbox Central Cabin Unit (UCH) ABS/ESP Airbag Air conditioning Dashboard Comfort systems Power steering Pilot suspension Etc.
Engine: Diagnostics of the engine computer Diagnostics of the injection computer (diesel, petrol, flex-fuel, gas, etc.) Programming of the injectors Calibration of the EGR valve Braking: Diagnostics of the ABS and ESP computers Diagnostics and maintenance of the brake parking lot Brake system bleeding Pollution: Diagnosis and regeneration of the particle filter Adblue module check Electronic check of pollutant emissions Check of the lambda probe Maintenance: Reset/initialization of the maintenance/oil change counter Bleeding of the various fluids (brakes , cooling) Read/erase engine faults Maintenance of the particle filter Air conditioning: Complete diagnosis of the electronic and mechanical system Reading of the parameters of the cooling circuit Test of the controls Ground connection: Electronic configuration of the tire size Electronic configuration of the tires (winter /summer) Tire pressure adjustment Electronic valve configuration Calibration of the steering wheel angle sensor (initialization of the steering angle) Safety: Activation of the safety airbags (locking/unlocking) Configuration of a new airbag computer Diagnosis of the airbag computers Configuration of the sensor Configuration of automatic lighting of lights Activation of xenon headlights Activation of reversing radar Equipment: Double dice Activation of car radio Configuration of CD charger Activation/alarm configuration Towing configuration Bicycle towing configuration Language supported by CAN Clip: Austrian, Belgian, English , German, Danish, Spanish, Finnish, French, Italian, Norwegian, Dutch, Portuguese, Romanian, Swedish, Swiss, Italian, Russian, Polish, Czech, Hungarian, Turkish, etc.
Your PC must be of the same language. For example: you want the Polish language, your PC must be in Polish. Installation tips: When you install any of the software, turn off your anti-virus and firewall, otherwise the files may be corrupted or deleted.
Compatible Win 7 32 bit only, you can install Virtual Machine to make it work on 64 bit system, Win 7, Win 8, Win 10.
When you connect the device to the car, please make sure the car voltage is above 13V.
Do not install two different versions on the same computer, this may corrupt the probe. Be sure to properly uninstall an older version before installing a new one.
Installation procedure: Installation video available after purchase.

CAN Clip V229 software for Renault - Dacia
€14,95
€29,95
The CAN Clip software is only compatible with the new diagnostic tool for RENAULT and DACIA vehicles.
>> Click here to access the Can Clip V229 diagnostic tool sheet The diagnostic software is: CAN Clip V229 for all Renault and Dacia vehicles until June 2023, only works under Windows in 32 bits.
Unlike other universal diagnostic tools that only read fault codes or generic functions, this software performs almost ALL the functions of the original dealer diagnostic tool.
The only missing functions are online operations requiring access to the brand's servers.
This version of CAN Clip will allow you to carry out the following operations: Reading and erasing error codes Reading of parameters (recording and graphic visualization) Testing of actuators Configuration of ECUs Coding (injectors, electronic valves, rim size, level of equipment, etc.) Calibration and self-learning (calibration of oil change interval, replacement of EGR valve, DPF, etc.) Reset of maintenance indicators Etc.
You will be able to communicate with the following computers: Diesel/petrol injection Automatic gearbox Central Cabin Unit (UCH) ABS/ESP Airbag Air conditioning Dashboard Comfort systems Power steering Pilot suspension Etc.
Engine: Diagnostics of the engine computer Diagnostics of the injection computer (diesel, petrol, flex-fuel, gas, etc.) Programming of the injectors Calibration of the EGR valve Braking: Diagnostics of the ABS and ESP computers Diagnostics and maintenance of the brake parking lot Brake system bleeding Pollution: Diagnosis and regeneration of the particle filter Adblue module check Electronic check of pollutant emissions Check of the lambda probe Maintenance: Reset/initialization of the maintenance/oil change counter Bleeding of the various fluids (brakes , cooling) Read/erase engine faults Maintenance of the particle filter Air conditioning: Complete diagnosis of the electronic and mechanical system Reading of the parameters of the cooling circuit Test of the controls Ground connection: Electronic configuration of the tire size Electronic configuration of the tires (winter /summer) Tire pressure adjustment Electronic valve configuration Calibration of the steering wheel angle sensor (initialization of the steering angle) Safety: Activation of the safety airbags (locking/unlocking) Configuration of a new airbag computer Diagnosis of the airbag computers Configuration of the sensor Configuration of automatic lighting of lights Activation of xenon headlights Activation of reversing radar Equipment: Double dice Activation of car radio Configuration of CD charger Activation/alarm configuration Towing configuration Bicycle towing configuration Language supported by CAN Clip: Austrian, Belgian, English , German, Danish, Spanish, Finnish, French, Italian, Norwegian, Dutch, Portuguese, Romanian, Swedish, Swiss, Italian, Russian, Polish, Czech, Hungarian, Turkish, etc.
Your PC must be of the same language. For example: you want the Polish language, your PC must be in Polish. Installation tips: When you install any of the software, turn off your anti-virus and firewall, otherwise the files may be corrupted or deleted.
Compatible Win 32 bit only, you can install Virtual Machine to make it work on 64 bit system, Win 7, Win 8, Win 10.
When you connect the device to the car, please make sure the car voltage is above 13V.
Do not install two different versions on the same computer, this may corrupt the probe. Be sure to properly uninstall an older version before installing a new one.
Installation procedure: Installation procedure video and provided.

MPPS V21 / V22
From €79,95
MPPS V18 / V21 / V22 Universal ECU (ECU) programming tool MPPS provides access to the ECUs of many vehicles in order to read the map, make changes to it and write it back to the ECU.
MPPS has a simple and intuitive interface that allows beginners to extract, modify and inject their cartography in a few minutes.
The MPPS v21 provides access to computers previously inaccessible with the GALLETTO and KWP2000+.
MPPS works under Windows 7, 8, 10, 11 (64bit) The MPPS reprogramming interface allows you to: Read and save your original map.
Reinject a new cartography.
Activate or deactivate components of your ECU.
Reprogram your ECU (power gain and consumption reduction) The MPPS is compatible with the majority of vehicles currently in circulation. Click here to see the list of vehicles supported by version V18.
Click here to see the list of vehicles supported by version V21.
Click here to see the list of vehicles supported by version V22.
Available in different languages: Afrikaans, Albanees, Bahasa Melayu, Czech, Cymraeg, Dansk, Deutsch, Esti, English, Espanol, Filipino, Finnish, Francais, Galego, German, Hrvatski, Indonesia, Italiano, Kiswahili, Latviesu, Lietuviskai, Magyar, Malti, Nederlands, Norsk, Polska, Portuguese, Romanian, Slovencina, Slovenski, Srpski, Suomea, Svensk, Turkish The MPPS is a powerful programming tool. It offers general read/write operations and checksum support, but it also includes some additional features: Excellent recovery functions. In some cases, MPPS can recover ECUs that other tools cannot even communicate with. On some controllers, it works even when no program is present (an empty memory).
Selection of full or partial read and write when the ECU allows this function.
Selectable read/write speed.
"Changes only" write function for faster programming (if ECU allows).
Automatic detection of K-Line/CAN, and ability to bypass and force preferred means of communication.
Temporary override of immobilizer to allow bench flashing on ME7 systems.
Boot mode support for ECUs with C167 and ST10 processors.
EEprom read/write functions for some ECUs are included.
Functions of MPPS V22: Added new FRF decryption in Tricore Boot.
Added PSA ME7.4.5 K-line/CAN and special mode.
Added Opel Vauxhall ME9.6.
Added Renault Delphi DCM 1.2 Can.
Added VAG Simos 6.2/6.3.
Fixed problem with Delphi E87 checksum.
Added new anti-timing search for EDC17 ECUs.
Added (M)EDC17 slave ECUs to both TP2 and UDS.
Various fixes and fixes.
Tricore Boot + OBD Unlock Module: TPROT / DS check feature, for testing if TPROT is active without opening ECU Auto detects ECU and processor type. No need to select from list, everything is automatic!
Read/Write of all memories Eeprom, Irom, Xrom (where possible) Patch function for OBD Flashing of TPROT ECU's in boot mode (supports only VAG at the moment) Support for unlocking of VAG Simos PCR and Simos 8 with external eeprom.
Checksum Correction supported for Bosch MEDC17 irom and eeprom.
Checksum Correction supported for Simos PCR, Simos 8 and SID208, SID209, SID305, SID807 irom NEW!Support for Bosch Service Mode to read password on ECUs using TP12+ NEW!Special file utility for creating OBD unlock files from VAS FRF/SGO containers (flash containers are not provided!). This function will allow you to work completely from OBD on locked ECUs!
Package Contents: 1x MPPS Main Unit 1x USB Cable 1x CD/QR Software Code / !\ It is important to note that we are not responsible for any misuse of tools, software or files.

OBD2 Scanner
From €89,95
€102,95
VAG OBD2 23.3 VAG Group Diagnosis and Programming Scanner The tool for VAG allows you to connect to a vehicle of the VAG group and carry out the diagnosis of all the computers. You will also be able to access advanced programming and coding features that a simple concessions tool (ODIS) will never have access to.
The probe models are: The probe with the ATMEGA162 compatible chip allows communication with vehicles from 1996 to 2017.
Please note that this product does NOT work online and cannot be updated. If you've used the product online before and it's locked, it's obsolete.
Also please note that the cable must be connected to the car before the LED lights up.
The scanner does not work with USB 3.0 ports, only USB 2.0 ports.
It is recommended that you disable your anti-virus software and disconnect the internet before installing and using the scanner. The probe with the original STM32F429 chip allows communication with vehicles from 1996 to 2022.
The scanner can be connected to the Internet, perform long coding and update. All language versions are the latest versions. It can be updated via the official website with the loader, and the English version can be launched directly.
The scanner also has an actual ARM ST32F429 chip and is compatible with cars from 1996 to 2022.
It supports multiple languages including English, Spanish, French, Italian, German, Polish, Portuguese, Russian, Danish, Dutch, Swedish, Hungarian, Romanian and Czech.
This OBD scanner will allow you to carry out the following operations: Reading and erasing error codes Reading parameters (recording and graphic display) Testing actuators Configuring computers Coding (injectors, electronic valves, rim size, level of equipment, etc.) Calibration and self-learning (calibration of the oil change interval, replacement of the EGR valve, DPF, etc.) Reset of the maintenance indicators Etc.
You will be able to communicate with the following computers: Diesel/petrol injection Automatic gearbox Central Cabin Unit (UCH) ABS/ESP Airbag Air conditioning Dashboard Comfort systems Power steering Pilot suspension Etc.
This tool allows you to perform engine diagnostics on all brands of the VAG group. (Audi, Volkswagen, Seat, Skoda).
Contents of the package: 1x Diagnostic interface 1x Software The VAG OBD2 software is available here IMPORTANT: Please follow the installation instructions on the CD to the letter / QR Download code Do not forget to deactivate your anti-virus as well as your Internet connection before use or installation.
If your CD is broken in the package, which commonly happens due to transport, contact us and we will send you the download links for the software. / !\ It is important to note that we are not responsible for any misuse of the tools, software or files.

Pack DAMOS + CHIPTUNING + TRAINING
€199,95
€319,95
20 CHIPTUNING Maps - STAGE 000/1/2 3 GB of original files, pre-modified files in Stage 20,5, Stage 1, Stage 2, etc. See the description of the Chiptuning archive here. 3 DAMOS for WinOLS - Super Mappack (.a2021l/.ols/.kp file) 2 GB - Damos Pack 41 2021 GB - Classic Damos Pack (damos, ols, a33l, kp), sorted and ranked! See the description of the Damos archive here. 2 Go - Course, video method and PDF on reprogramming Stage 4/1/2 on Winols (in English) See the description of the Winols video training here. IMPORTANT ! Read this imperatively before buying! Sending the download link after your purchase. If the link is not received within 3 hours, please check your spam folder or contact us via the contact form. Due to the digital nature of this product, no returns are accepted. For professional use only. Please do not request a specific file. We do not provide educational content or other technical support to prevent misuse of files. We are not responsible for misuse of software or files. We take no responsibility for any damage to your ECU if the wrong files are used or a mistake is made. Please note that most of the files are for European market cars. If all of this is too heavy for you, don't buy it. /!\ Modified files are modification examples, you must read your ECU file (.bin) and set it manually, because if it is not 24% identical and there is an error it will crash your ECU, be careful /!\

Multidiag Pro+
€99,95
€119,95
MULTIDIAG PRO+ is a fast and reliable multi-brand diagnostic tool serving as a link between the vehicle and the computer. Compatible 2017.R3/2018.R0 and 2020.23/2021.10 Please note that the default version of the supplied CD is 2017. With the CARS software you are able to perform car and van brand specific diagnostics from from 1988. A total of 69 different brands. With TRUCKS software, you are able to perform brand specific diagnostics for light and heavy commercial vehicles, buses and trailers from 1995 onwards. A total of 77 different brands. The GENERIC diagnostic program is designed for legislation based diagnostics, specifically targeted for emissions related fault codes. GENERIC is included in CARS and TRUCKS packs. Multiplexer function, 2xHS CAN (ISO 11898-2), SW CAN (SAE J2411), K/L (ISO 9141-2), VPW (J1850), PWM (J1850), RS485 (J1708), TTL and (SPI, analog in, 5 volt out).Allows to realize: Read and erase fault codes Read real-time data Basic setting Scanning function Fully compliant with eOBD/OBDII standard.
30-day money-back guarantee*
Free delivery in EU
Maximum payment security
Easy returns in the EU